Lycoming

EZ154

O-540 182RG
Power Consumption: 125 watts (no thermostat)
Power Requirement:
110/120 volts (also available in 220 volt)
Size:
2.25″ x 4″
Shipping Weight: 1 lbs.

Quantity

Price: $53.45

Loading Updating cart…

EZ440

EZ440

C-125 to O-300, E-165 to E-225

IO-360, TIO-360, TSIO-360

O-320 H2AD & Rear Carb, O-435

O-540, IO-540 AB on a 182

Power Consumption:
300 watts or less / Thermostatically Controlled

Power Requirement:
110/120 volts (models 441 and 540 are available in 220 volts)

Installation Tips: On the H2AD, the heater mounts on the forward slanted face of the oil sump. On the rear carb engine, the heater mounts on the bottom of the oil sump ahead of the carb.

Preheat Time:
3 to 5 hours on cold soaked engine, although, since unit is thermostatically controlled, it may be left on overnight, or all the time. Cowl covers and prop covers are recommended for extreme cold weather, They also reduce preheat time.

Size:
3 3/4 x 4 1/2
$ 169.95

Quantity

Price: $169.95

Loading Updating cart…

EZ441

EZ441

O-320(except H & rear carb), O-360, O-470, IO-470
O-520, IO-520, TIO-520, O-540, IO-550, TIO-550
Power Consumption:
300 watts or less / Thermostatically Controlled

Power Requirement:
110/120 volts (models 441 and 540 are available in 220 volts)

Installation Tips: On the O-320 (except H & Rear Carb) & the O-360- Sitting in the pilot’s seat, the heater normally mounts on the right side of the oil sump with the thermostat facing the propeller.

Preheat Time:
3 to 5 hours on cold soaked engine, although, since unit is thermostatically controlled, it may be left on overnight, or all the time. Cowl covers and prop covers are recommended for extreme cold weather, They also reduce preheat time.

Size:
3 3/4 x 5
$ 169.95

Quantity

Price: $169.95

Loading Updating cart…

EZ470

EZ470

O-470 and IO-470
O-520 & IO-520;IO-720

Power Consumption:
300 watts or less / Thermostatically Controlled

Power Requirement:
110/120 volts (models 441 and 540 are available in 220 volts).

Preheat Time:
3 to 5 hours on cold soaked engine, although, since unit is thermostatically controlled, it may be left on overnight, or all the time. Cowl covers and prop covers are recommended for extreme cold weather, They also reduce preheat time.

4×7 pad W/O a lighted cord and NO peel and stick back.
$ 169.95

Quantity

Price: $169.95

Loading Updating cart…

EZ540

EZ540

*O-470, *IO-470
*O-520, *IO-520
IO-540 A,B,E,G,K,M,S,P, IO-550, TIO-550,
TIO-520, TIO-540 (except C), IO-720

Power Consumption:
300 watts or less / Thermostatically Controlled

Power Requirement:
110/120 volts (models 441 and 540 are available in 220 volts).

Preheat Time:
3 to 5 hours on cold soaked engine. Since the unit is thermostatically controlled, it may be left on overnight, or on all the time. Cowl covers and prop covers are recommended for extreme cold weather. They also reduce preheat time.

Size:
2 pads 1) 3 1/4 x 4 1/2, 2) 3 x 4 with a 21″ cord connecting the pads with one lighted plug.
*Where Space Allows
$ 199.95

Quantity

Price: $199.95

Loading Updating cart…

EZ912

EZ912

912 and 914 Rotax Engines

L3B if in an RG

This heater is a 2 pad system that is thermodynamically balanced to maintain around 165 degrees F on the oil tank and case of engine. By heating the engine for the bottom , the whole engine becomes warm as we all know heat rises. At -20 F after 4 hours, the oil temp is 160 degrees F, the case is 120F and the cylinders are 85 degrees F. It is designed for the light sport aircraft that utilize the 912/914 family engines. Simply peel and stick heater pads on the oil reservoir and bottom case and run power cord by dip stick and you are ready to go. Everything comes complete to do the installation.
No more cold starts that can prematurely damage your engine.

With the use of the new E-Z Heat model 912, the whole engine is nice and warm, even if the outside air temp is -30 degrees below!

35 1/2″ cord connecting the 2 pads (no thermostat)

2 pads 1.5′ X 6′

Quantity

Price: $169.95

Loading Updating cart…

EZ441/220v

EZ441/220v

O-320(except H & rear carb), O-360, O-470, IO-470
O-520, IO-520, TIO-520, O-540, IO-550, TIO-550
Power Consumption:
300 watts or less / Thermostatically Controlled

Power Requirement:
220 volts

Preheat Time:
3 to 5 hours on cold soaked engine, although, since unit is thermostatically controlled, it may be left on overnight, or all the time. Cowl covers and prop covers are recommended for extreme cold weather, They also reduce preheat time.

Size:
3 3/4 x 5
$ 169.95

Quantity

Price: $169.95

Loading Updating cart…

EZ540/220v

EZ540/220v

*O-470, *IO-470
*O-520, *IO-520
IO-540, IO-550, TIO-550,
TIO-520, TIO-540 (except C)

Power Consumption:
300 watts or less / Thermostatically Controlled

Power Requirement:
220 volts

Preheat Time:
3 to 5 hours on cold soaked engine. Since the unit is thermostatically controlled, it may be left on overnight, or on all the time. Cowl covers and prop covers are recommended for extreme cold weather. They also reduce preheat time.

Size:
2 pads 1) 3 1/4 x 4 1/2, 2) 3 x 4
*Where Space Allows
$ 199.95

Quantity

Price: $199.95

Loading Updating cart…

EZ442

EZ442

IO-360 A & C Series

Power Consumption:
300 watts or less / Thermostatically Controlled

Power Requirement:
110/120 volts

Installation Hints: Heater wraps on the side of the oil sump opposite the data plate.

Preheat Time:
3 to 5 hours on cold soaked engine, although, since unit is thermostatically controlled, it may be left on overnight, or all the time if plane is used at least a few times a month. Cowl covers and prop covers are recommended for extreme cold weather. They also reduce preheat time.

Size:
2 1/4″ X 13″
$ 169.95

Quantity

Price: $169.95

Loading Updating cart…
LoadingUpdating…
Contact Form Powered By : XYZScripts.com